Меню Рубрики

Установка mac os на lenovo g505

Установка mac os на lenovo g505

    UEFI bios:
  1. Скидываем все настройки в default.
  2. AHCI — enable;
  3. Vt-d: Disable (+ в Clover дропнуть DMAR таблицу)
  4. Vt-x: Enable (только для 10.13 и если используете виртуальные машины)
  5. Intel Virtualization Technology — Enable
  6. Serial-port: Disable
  7. XHCI Hand-off: Disable (рекомендуеться)
  8. XHCI Hand-off: Enabled (только если что то не работает в режиме Disable )
  9. IOAPIC 24-119 Entries: Enabled (подмечено что у многих с этим пунктом паникует, поэтому тестируйте)
  10. CSM: Disable (по возможности)
  11. Fasboot: Disable
  12. Secure boot: Disable or Other OS

Legacy bios:

  • AHCI: enable;
  • HPET: enable;
  • Vt-d: disable;
  • ACPI Suspend Type — S3 (Only);
  • No Execute memory — enable;
  • USB Legacy — enable;
  • Отключаем всю периферию (вебки, смарты, блютуз-свистки, кард-ридеры и т.д.)
  • . .
    [i]Примечание:

    1. HDD должен быть подключен к SATA-0, контролер Intel.
    2. . [/i]

    Для установки потребуется флешка не менее 8Гб.

    1. ПК на ОС Windows XP/7/8.
    2. Скачать утилиту Boot Disk Utility с страницы разработчика cvad или с форума applelife.ru со страницы посвящённой данной утилите.
    3. Установить по инструкции
    4. Зайти на флешку в папку EFI\CLOVER\ и удалить папку OEM и файл config-sample (не путать с config.plist).
    5. Зайти на https://github.com/aci…pleSupportPkg/releases скачать ApfsDriverLoader.efi и скопировать его в папку EFI\CLOVER\drivers64UEFI (необходимо для macOs 10.13 и выше!)
    6. Добавить в EFI\CLOVER\Kext\Other https://github.com/acidanthera/Lilu/releases
    7. Добавить в EFI\CLOVER\Kext\Other https://github.com/aci…WhateverGreen/releases
    8. Скачать образ Mac OS X по указанным ссылкам:
      Нажми и качай!
    9. Развернуть скаченный образ на подготовленную флешку.
      1. Инструкция с applelife.ru пункт «Заливка дистрибутива macOS на второй том загрузочного USB Flash drive:«:
      2. Перед распаковкой образа необходимо нажать кнопку ^Format disk^.
      3. В основном окне программы -> Destination Disk — выбираем наш USB Flash Drive -> Part2.
      4. Нажимаем кнопку «Restore Partition».
      5. В открывшемся окне проводника выбираем распакованный файл с расширением *.hfs.
    10. Тем, кто устанавливает на ноутбук (или имеет PS/2 мышь или клавиатуру) , обязательно скачать VoodooPS2Controller.kext.zip ( 97,46 КБ )
      , новая версия: VoodooPS2Controller.kext.zip ( 93,86 КБ )
      положить в папку EFI/CLOVER/KEXT/10.X или Other
    11. Всё, установочная флешка готова, можно приступать к установке.

    За данный споcоб установки благодарим cvad и Skvo
    Данная инструкция написана по материалам с applelife.ru

    Установить один из загрузчиков на диск (если он не входит в состав сборки) :
    — Загрузчик №1 — Clover (рекомендуется для большинства пользователей);
    Как это сделать: UEFI, Legacy BIOS.
    — Загрузчик №2 — OpenCore (для опытных пользователей)
    — Загрузчик №3 — Chameleon (на данный момент существует для очень старых систем и особых случаев);
    *загрузчик устанавливаем только один, на ваш выбор

    После входа в macOS первое, что делаем:

    1. Устанавливаем кекст для сетевой карты;
    2. Настраиваем SMbios;
    3. «Заводим» видео-карту (разрешение должно быть правильным, и верхняя строка прозрачная);
    4. Поднимаем «нативное управление питанием» процессора;
    5. Поднимаем звук через AppleALC или VoodooHDA

    .
    21. Ставим програмулинки и «рюшечки».

    источник

    Установка mac os на lenovo g505

    Сейчас вы увидите в фотографиях, как легко и просто можно настроить BIOS на ноутбуке Lenovo G505 для загрузки с флешки или привода. В данном примере я покажу, как загрузится с привода. Аналогично так же можно загрузится и с флешки.

    Данная моделька ноутбука идет с Windows 8, и как мы уже понимаем биос UEFI. Но мне понравился биос, тем что есть возможно переключения работы жесткого диска из AHCI в IDE, но это не суть.

    Перейдем к настройке BIOS ноутбука Lenovo G505.

    Для начала нам нужно попасть в сам БИОС, для этого мы выключаем ноутбук и нажимаем кнопку находящаяся рядом с кнопкой включения ноутбука.

    Если кто то не понял вот фотография. Маленькая кнопка с стрелкой.

    После нажатия на кнопку, ноутбук включится и появится меню.

    Нас интересовать будет 2 и 3 пункт («BIOS Setup» и «Boot menu»).

    P.S.: 4 Пункт для восстановления Windows с образа записанного на жесткий диск, то есть если жесткий диск меняли или уже переустанавливали Windows в обход System Recovery, то этот пункт можете вычеркнуть=).

    Заходи в «BIOS Setup» и видим краткую характеристику ноутбука. Нам это не интересно.

    Дальше переходим в вкладку «Security», делаем как на фотографии.

    Тобишь отключаем опцию, «Secure Boot» на «Disabled».

    А теперь переходим к интересному, это к вкладке «Boot».

    И так по дефолтным настройкам в вкладке «BOOT» мы видим, что биос работает в «UEFI» режиме, ниже делаем как на фотографиях

    «Boot Mode» переводим в режим «Legacy Support» и появляется еще одна опция.

    Опцию «Boot Priority» переводим в режим «Legacy First».

    И вот почти закончили настройку BIOS для загрузки с привода или флешки на ноутбуке Lenovo G505.

    Нам осталось сохранить настройки. Для этого переходим в вкладку «EXIT».

    Здесь выбираем «Save Changes» и выключаем ноутбук с кнопки, либо «Exit Saving Changes» и на включении выключаем так же с кнопки включения. В дальнейшем объясню почему надо так делать.

    Или загружаемся с ОС и выключаем.

    И так же, почему надо выключать было ноутбук? Я показал настройки отключения «UEFI» и с возможностью загрузки с флешки или привода, но при этом не раздал изначальный приоритет запуска ноутбука, т.к. потребовался опять же перезапуск для появления устройств.

    Тем самым облегчив и упростив для нас загрузку с флешки или привода.

    Выключив ноутбук, опять нажимаем на кнопку Recovery (которая со стрелочкой). Здесь уже не будем входить в «BIOS Setup», а перейдем к вкладке «BOOT Menu».

    Выбираем и нажимаем «Enter» и вуаля видим все устройства с которых можем произвести загрузку.

    P.S.: Флешка будет подписана, как USB HDD.

    Вот и вся настройка ноутбука Lebovo G505 для загрузки с флешки или привода.

    источник

    os x mavericks on lenovo g505s

    11 posts in this topic

    Recommended Posts

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It’s easy!

    Sign in

    Already have an account? Sign in here.

    Recently Browsing 0 members

    No registered users viewing this page.

    Announcements

    Similar Content

    After a long time of cooking this computer up with a lot of stuff, I’m finally releasing my guide for this P50 with OpenCore.

    Lenovo ThinkPad P50 macOS Install with OpenCore

    This thread may be used for questions/corrections/additions. Good Luck.

    Читайте также:  Установка вай фай адаптера в компьютере

    Installing macOS Catalina 10.15.4 on Lenovo ThinkPad L440

    There are two version of this laptop:
    — 20AS = Chipset QM87, without Express Card (mine).
    — 20AT = Chipset HM86, with Express Card.
    I strong believe is the same thing.

    03/24/2020 20:30h GMT-0
    — Added 10.15.3 update instructions.

    01/30/2020 23:52h GMT-0
    — Added 10.15.3 update instructions.

    12/11/2019 04:24h GMT-0
    — Added 10.15.2 update instructions.
    — Replaced IntelMausiEthernet.kext with IntelMausi.kext.

    11/08/2019 20:30h GMT-0
    — Added instructions to swap Command with Option keys in VoodooPS2Controller.kext.
    — Added additional FileVault 2 UEFI drivers be more practical.

    10/30/2019 01:42h GMT-0
    — Added 10.15.1 update instructions.
    — Replaced AppleALC.kext with VoodooHDA.kext
    — No more issues after sleep or misconfiguration with jack sense.

    10/29/2019 18:18h GMT-0
    — Replaced the config.plist with AppleIntelCPUPM = true.

    10/27/2019 05:37h GMT-0
    — Replaced the DW1560 wireless card with BCM94360CS2.

    10/20/2019 20:47h GMT-0
    — Removed AppleBacklightFixup.kext.
    — WhateaverGreen now implements backlight since 1.2.5.

    10/20/2019 18:10h GMT-0
    — First version.

    What works and what does not

    — Processor: Intel Core i5-4300M -> Work. All SpeedStep stages.
    — Video Card: Intel HD4600 -> Work. QE/CI and Metal.
    — Chipset: Intel QM87 -> Work.
    — Mini DisplayPort -> Work. But no audio, yet.
    — VGA -> Not work. Normal.
    — Audio: ALC292 -> Work.
    — WiFi/Bluetooth: Intel AC 7260 -> Not work. Replaced with DW1560 BCM94360CS2 (need whitelist removal).
    — Ethernet: Intel I217-LM -> Work.
    — Card Reader: Realtek RTS5227 -> Not work.
    — Keyboard and Touchpad -> Work.
    — Webcam -> Work.
    — Fingerprint Reader -> Not work. Normal.
    — USB3.0 -> Work.
    — Sleep -> Work.
    — Airdrop, Handoff and Continuity -> Work after replaced wireless.
    — Instant Hotspot -> Not work.

    — FullHD 1920×1080 display upgrade:
    Replaced with AU Optronics B140HAN01.1 30pin eDP (B140HAN01.2 and B140HAN01.3 also compatible).
    Apparently same screen as Dell Latitude E6440, E7440, Lenovo Ideapad U430 and E129.

    — CPU upgrade:
    Replaced the stock Intel Core i5 4300M 2.6Ghz (3.3Ghz turbo) 6M cache with Intel Core i7 4700MQ 2.4Ghz (3.4Ghz turbo) 6MB.
    I initially had problems with overheating. The processor ran at full load above 90 degrees.
    After using a quality thermal paste I can work between 70 and 80 degrees.
    Acceptable taking into consideration that the new processor has 47TDP versus 37TDP which is recommended.
    I also had no problem consuming the battery while charging. The original 65W source seems to have figured out.

    — Touchpad upgrade:
    Replaced the stock with T460 touchpad.
    This is serious: you have to do it! It should be stock. Touchpad with precision and absurd quality!
    Just do it!

    — RAM upgrade:
    16GB (2x8GB). No mistery here. Just upgade.

    — Wireless upgrade:
    Previously I have the DW1560 working almost perfectly, now replaced with BCM94360CS2 that is full native supported.
    More info below.

    — Make DP audio work.
    — Make Card Reader work.
    — Make trackpad appear in System Preferences
    — Make Instant Hotspot work.

    — Running install of macOS
    — One USB flash drive of 8GB or bigger
    — macOS Catalina install app
    — Clover EFI
    — Clover Configurator
    — Some KEXTs and SSDT patches

    How create create the install flash drive

    Prepare install flash drive

    Format the flash drive with GU >
    — Open Disk Utility.
    — Click in View, then «Show All Devices».
    — Select the destination flash drive, then Erase.
    — Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map

    Create install flash drive

    Open terminal and run this command:
    sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia —volume /Volumes/Install —nointeraction This will take about 30 minutes.

    Download the CloverEFI from official repository (used 5097) and install only with these options on «Install macOS Catalina»:

    — Install for UEFI booting only
    — Install Clover in the ESP
    — UEFI Drivers — Recommended Drivers — AudioDxe (Just to have nice sound on boot)
    — UEFI Drivers — Recommended Drivers — FSInject (I still don’t know if it’s really necessary)
    — UEFI Drivers — File System drivers — ApfsDriverLoader (Support to APFS partitions)
    — UEFI Drivers — File System drivers — VBoxHfs (Support HFS/HFS+ partitions)
    — UEFI Drivers — Memory fix drivers — AptioMemoryFix (Fix the memory management of de UEFI/BIOS)

    If you plan to use FileVault 2, you need to download additional drivers, since what comes with Clover is not up to date and use VirtualSMC instead of FakeSMC.
    Follow instructions bellow:

    From current Clover installation, check these options to USB keyboard/mouse work on password screen:
    — UEFI Drivers — Human Interface Devices — UsbKbDxe
    — UEFI Drivers — Human Interface Devices — UsbMouseDxe

    After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.

    Download the versions 2.1.0 and 2.0.9 of AppleSupportPkg from: https://github.com/acidanthera/AppleSupportPkg/releases
    We need the last version of AppleGenericInput.efi that is inside 2.1.0 and last version of AppleUiSupport.efi that is inside 2.0.9.
    OR download attached bellow.

    Put in /Volumes/EFI/EFI/CLOVER/drivers/UEFI/

    That’s it! FileVault 2 will work without problems.

    After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.

    — Replace the /Volumes/EFI/EFI/CLOVER/config.plist with mine attached below
    — Put SSDT-L440.aml attached below in /Volumes/EFI/EFI/CLOVER/ACPI/patched/

    Generate your Serial, MLB and SmUUID

    — Open the replaced config.plist with Clover Configurator (used 5.6.2.0)
    — Go to SMBIOS, click few times in «Generate New» in Serial Number and SmUUID.

    Copy the Clover Configurator to flash drive because you will need later.

    Download those Kexts and put in /EFI/CLOVER/kexts/Other/

    — Download the VirtualSMC from here. I used all Kexts and UEFI driver (put VirutalSmc.efi inside /Volumes/EFI/EFI/drivers/UEFI/) from version 1.0.8 (If you followed the steps to enable FileVault 2 above, skip to the next item).
    — Download the Lilu.kext from here. I used the version 1.3.8.
    — Download the VoodooPS2Controller.kext from here. I used version 2.0.4.
    — Download the IntelMausi.kext from here. I used the version 1.0.2.
    — Download the VoodooHDA.kext from here. I used the version 2.9.2. (Need to turn up the volume on Info.plist, more instructions below)
    — Download the WhateverGreen.kext from here. I used the version 1.3.3.
    — Download the USBInjectAll.kext from here. I used the version 2018-1108.

    Читайте также:  Установка гбо на мазду краснодара

    Important! If you are coming from my previous Mojave guide, please note that I am using some kexts from other repositories / authors.

    — Open the Info.plist inside VoodooHDA.kext/Contents/ with TextEdit.app or any text editor of your choice.
    — Change:
    PCM 90 to:
    PCM 140 Or, download the versions 2.9.2 attached bellow.

    Keyboard swap Command with Option (optional)

    — If you prefer, you can swap Command and Option keys, to map Win Key — Command and Alt — Option.
    — Change /Volumes/EFI/EFI/CLOVER/OEM/S400CA/UEFI/kexts/10.15/VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Keyboard.kext/Contents/Info.plist:
    Swap command and option to:
    Swap command and option Or, download the version 2.0.4 already adjusted attached bellow.

    Wifi and Bluetooth (BCM94360CS2 + M2 NGFF adapter)

    Recently I replaced the DW1560 with BCM94360CS2. Now I have fully wireless and bluetooth working (including Instant Hotspot) without any kexts.

    Wifi and Bluetooth (DW1560 / BCM94352Z)

    Unfortunately, some notebook manufacturers are currently blocking the replacement of wireless cards. They want you to only use the models sold by them. And of course, none of them from Lenovo for this notebook model is compatible with MacOS.

    If you try to start with an unauthorized wifi card for them, you will receive a screen error:
    1802: Unauthorized network card is plugged in — Power off and remove the network card. Since this check is done directly in the BIOS, the only solution is to modify it.
    But since nothing is easy in this life, there is one small big problem:
    — The BIOS update procedure does not allow you to use modded files as it used to be.
    — You will need to physically reach your BIOS on the motherboard and make use of a USB BIOS reader/writer.

    So what you need to do:
    1. Disassembly your laptop;
    2. Dump your BIOS with an USB BIOS reader with SOIC8 clip (to not desolder from the motherboard);
    3. Patch it (Ask on UEFI hack forums over there to someone patch for you. Every dump is unique, so mine don’t work to you.);
    4. Fix RSA signature;
    5. Reflash BIOS;
    6. Replace wireless card;
    7. Remount your laptop;
    8. Done.

    To fix a Modded BIOS to remove the 5 beeps on boot, you need this guide: https://www.insanelymac.com/forum/topic/337333-guide-fix-insyde-h2o-bios-signature-5-beeps-on-lenovo (traduzido: pt-BR)

    After replaced the wireless card. Download those Kexts and put in /Volumes/EFI/EFI/CLOVER/kexts/10.15/

    — Download the AirportBrcmFixup.kext from here. I used the version 2.0.3. (To enable Wireless)
    — Download the BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext from here. I used the version 2019-10-17. (To enable Bluetooth)
    — Download the BT4LEContinuityFixup.kext from here. I used the version 1.1.4. (To enable Handoff and Continuity)

    Keep in mind that the bluetooth kexts are currently in development and the official releases will be available in future in the repository: https://github.com/acidanthera/BrcmPatchRAM/releases

    Now you can start the installation without problem (I guess).

    UEFI Setup Configuration and Installation

    My BIOS is the latest: 1.93 (J4ET93WW)

    — Shutdown and insert the flash drive.
    — Power on with F1 pressed to enter BIOS setup.
    — Change value: Config — Intel(R) AMT — Intel(R) AMT Control to DISABLED
    — Change value: Security — Security Chip to DISABLED
    — Change value: Security — Anti-Theft — Intel(R) AT Module Activation to DISABLED
    — Change value: Security — Anti-Theft — Computrace to DISABLED
    — Change value: Security — Secure Boot to DISABLED
    — Change value: Startup — UEFI/Legacy Boot to BOTH, Legacy First and CSM Support = Yes
    — Save & Exit Setup (F10)

    — Now, hold the F12
    — In the list, select your flash drive.
    — Choose the flash drive (white icon).

    The installer will start.
    
    Format destination disk

    Format the disk with GU >
    — Select Disk Utility in the list, then press Continue.
    — Click in View, then «Show All Devices».
    — Select the destination Disk, then Erase.
    — Name: HD, Format: APFS and Scheme: GU >
    Close Disk Utility.
    
    Select «Install macOS», then Continue.
    Follow instructions in screen.

    After first part install the system will reboot. Maybe you have to press F12 again and select the flash drive.

    Choose the internal disk (gray hdd icon) if not already selected.

    The second part of the installation will begin. This will take 16 minutes.

    When the second part of install finish, the system will reboot again.

    After performing the user initial setup and go to the desktop, you need to make the system disk bootable.

    Open the Clover Configurator from flash drive that you copied before.

    Mount and open the flash drive EFI partition. (Inside Clover Configurator, Mount EFI -> Select flash drive in Efi Partitions list -> Mount Partition -> Open Partition)

    Copy the EFI folder to desktop.

    Go back to Clover Configurator, unmount the EFI partition of the flash drive and mount and open the EFI partition of internal disk.

    Move the EFI folder from Desktop to EFI partition of the internal disk.

    Move all Kexts from EFI partition of internal disk to /Library/Extensions and make kext cache, with those commands in Terminal:
    sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/10.15/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.

    Updated without changing or updating anything.

    Before install, update the following kexts:
    — VirtualSMC.kext and all kexts and VirtualSmc.efi. I used version 1.0.9.
    — Lilu.kext. I used version 1.4.0.
    — WhateverGreen.kext. I used version 1.3.5.
    — AppleALC.kext. I used version 1.4.4.
    — VoodooPS2Controller.kext. I used version 2.1.0.
    (all download links above)

    Читайте также:  Установка linux mint cinnamon в virtualbox

    Download the latest CLOVERX64.efi.zip build. I used version 5100.
    Mount EFI partition and unzip to:
    — /Volumes/EFI/EFI/CLOVER/CLOVERX64.efi
    — /Volumes/EFI/EFI/BOOT/BOOTX64.efi (rename the copy of CLOVERX64.efi to BOOTX64.efi

    Install update. Will reboot at least four time.

    Updated with success without changing anything.

    10.15.4
    Before install, update the following kexts:
    — Lilu.kext. I used version 1.4.2.
    — WhateverGreen.kext. I used version 1.3.7.
    — VirtualSMC.kext. I used version 1.3.7.
    — VoodooP2Controller.kext. I used versions 2.1.2.
    (all download links above)

    Download the latest CLOVER installer. I used version 5107.
    — Install respecting the configuration mentioned above in «Install bootloader» section.

    Install update. Will reboot at least four time.

    I would like to thank the following community members, by making these dream possible:
    @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas, @»Sniki», @Mieze, @headkaze and all others members involved directly or indirectly.

    SSDT-L440.aml
    config.plist
    VoodooHDA.kext.zip
    VoodooPS2Controller.kext.zip
    Filevault 2 additional drivers.zip

    Me (and many other people) experience eye-ache from new Macbooks (and windows machines).

    I have spent two years of trial-and-error and found that installing macOS Mavericks on my MacBook (pro 13 late 2013, Intel Iris 1536 MB) resolves the issue of eye ache completely. (it is believed that newer systems use harsher version of temporal dithering that causes of a certain group of indivisuals eye aches).

    I cannot stay at Mavericks because of software support and security issues, so the only thing is an issue now:

    How can I take drivers from Mavericks and install them on Catalina? (I tried replacing .kext in /System/Library/Extensions with old files but it didn’t work).

    It would be so great if possible!

    Lenovo T460 macOS with Clover Guide
    Latest Release on GitHub (March 2020) Updated to Clover r5105 Updated Lilu based kexts — Lilu, ALC, WEG Added AirportBrcmFixup.kext
    Various Tweaks over Last months The zip file is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle is tested on Sierra.
    Note: I never got the GFX fully working on El Capitan.
    Full Clover file set — config.plist etc. Includes all custom kexts Includes custom DSDT/SSDT scripts and patches Utility scripts The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
    Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920×1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
    Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
    Devices and aspects working:
    Ethernet — Intel I219LM is enabled via IntelMausiEthernext.kext WiFi/BT — substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip Audio — ALC293 codec implemented via AppleALC.kext (the old AppleHDA_ALC293 and CodecCommander kexts are not needed) PS2 — ClickPad + TrackPoint + all 3 buttons — using a modified VoodooPS2Controller to support new layouts — and added some custom Fn key maps based on 440/450 dsdt USB — implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work — 3 external USB and internal Camera, BT, etc Sleep/Wake — the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices. Note: have not tried to implement the SD card reader — no driver found.
    ACPI Files
    New Installation — Steps and Details
    Part 1 — OS Installation
    Part 2- Post OS Installation and Setup
    Notes on Custom Kexts

    —Donations via PayPal—
    https://tinyurl.com/r2bvzm7

    —Original Topic—
    https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/

    -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
    -Wifi card has been replaced with Dell DW1560!
    -I’m using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
    -Update bios/uefi to last version

    —Clover Folder—
    Just paste EFI folder inside EFI partition
    https://www.olarila.com/files/Clover.Folder/Lenovo IdeaPad S145.zip
    Notebooks with ELAN trackpad use it with my folder above
    IdeaPad S145 ELAN.zip

    Bluetooth Broadcom
    Bluetooth Broadcom.zip

    CPUFriend for i5-8265U
    CPUFriend i5-8265U.zip

    —Full DSDT Patches—
    -My DSDT
    DSDT Lenovo IdeaPad S145.zip

    This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
    -Patches
    -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES —IGPU Patch—
    Video solution with HDMI Audio and Video
    PciRoot(0x0)/Pci(0x2,0x0) AAPL,GfxYTile AQAAAA== AAPL,ig-platform-id CQClPg== device-id pT4AAA== enable-hdmi20 AQAAAA== framebuffer-con0-alldata AAAIAAIAAACYAAAA framebuffer-con0-enable 1 framebuffer-con1-alldata AQEJAAAIAADHAQAA framebuffer-con1-enable 1 framebuffer-con2-alldata AgYKAAAEAADHAQAA framebuffer-con2-enable 1 framebuffer-fbmem AACQAA== framebuffer-patch-enable AQAAAA== framebuffer-stolenmem AAAwAQ== framebuffer-unifiedmem AAAAgA== hda-gfx onboard-1 model Intel Corporation, Cannon Point-LP Iris Plus Graphics 655 —Native USB Fix for Notebooks — No Injector/Kext Required—
    https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
    https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/

    Clover https://github.com/CloverHackyColor/CloverBootloader
    AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
    AppleALC.kext https://github.com/acidanthera/AppleALC
    Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
    Lilu.kext https://github.com/acidanthera/Lilu
    SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
    VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
    VoodooI2C.kext https://github.com/alexandred/VoodooI2C
    VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
    WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
    MaciASL — https://github.com/acidanthera/MaciASL
    acpica — https://github.com/acpica/acpica
    AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
    ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
    HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
    Hackintool https://github.com/headkaze/Hackintool

    -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!

    Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!

    We’re all here to have fun and learn from each other!

    источник

    Добавить комментарий

    Adblock
    detector