Меню Рубрики

Установка qt for symbian

Note: Qt for the Symbian platform has some requirements that are given in more detail in the Qt for the Symbian platform Requirements document.

Note: This document describes how to install and configure Qt for the Symbian platform from scratch. If you are using pre-built binaries, follow the instructions given in the Installing Qt on the Symbian platform from a Binary Package document.

    Setup the development environment

Make sure your Symbian development environment is correctly installed and patched as explained in the Qt for the Symbian platform Requirements document.

After you have finished the Symbian development environment setup, it is good to verify that environment is functional for example by compiling one of the pure Symbian examples for both emulator and HW. This can be done from command prompt as follows:

If all steps pass without errors your Symbian development environment is very likely installed correctly.

Uncompress the downloaded source package into the directory you want Qt installed, e.g. C:\Qt\4.6.4.

Note: Qt must be installed on the same drive as the Symbian SDK you are using, and the install path must not contain any spaces.

Для работы с Qt, вам нужно добавить путь в переменную среды PATH:

Сделайте это добавлением c:\Qt\4.6.4\bin к переменной PATH.

On Windows the PATH can be extended by navigating to «Control Panel->System->Advanced->Environment variables».

In addition, you must configure the environment for use with the Symbian emulator. This is done by locating the Carbide.c++ submenu on the Start menu, and choosing «Configure environment for WINSCW command line».

If you are planning to use abld (the default build system that comes with the S60 SDK) to build Qt, you will also need to set the following environment variable:

This is not necessary for other applications, only when building Qt.

To configure Qt for the Symbian platform, do:

to build the tools using MinGW, and the libraries using abld. или

to build the tools using MinGW, and the libraries using SBSv2.

SBSv2 (also known as Raptor) is a next-generation Symbian build system. SBSv2 is not officially supported by any of the S60 SDKs currently available from Forum Nokia.

To build Qt for the emulator, type:

To build Qt for the device, type:

Congratulations, Qt is now ready to use.

Installing Qt libraries on the device

To run the demo on a real device, you first have to install the Qt libraries on the device:

The Qt libraries are built with «All -Tcb» capability, so that they can support all types of application. If you don’t have a suitable certificate, it is possible to patch the binaries as follows:

    Installing Qt without a certificate

If you have no certificate, build a self signed Qt:

Installing Qt with a Symbian developer certificate

If you have a symbian-signed developer certificate, specify the capabilities you can sign for, for example:

Запуск демонстрационных программ Qt

We’ve included a subset of the Qt demos in this package for you to try out. An excellent starting point is the «fluidlauncher» demo.

Similarly, install fluidlauncher to the device:

This will create a self-signed fluidlauncher.sis and install it to your device.

To run the demos on the emulator simply navigate to the directory of the demo you want to see and run:

For more information about building and running Qt programs on the Symbian platform, see The Symbian platform — Introduction to Qt.

Мы надеемся, что вам понравится использование Qt.

источник

Установка qt for symbian

QT Installer
Версия: 4.8

Последнее обновление программы в шапке: 03.11.2011

Описание:
Qt (произносится «кьют») — кросс-платформенный инструментарий разработки ПО на языке программирования C++. С помощью этих инструментов уже пишутся (nokia N8, C7, n900, etc) новые программы на Symbian: gPsp, Wikitube, etc. и прочие платформы (Meego в перспективе)
QT Installer — для смартфонов Nokia является установщиком рабочих компонентов кросс-платформенного инструмента разработки программного обеспечения Qt. Запустите программу QT Installer на Вашем смартфоне и в результате чего будут автоматически установлены необходимые библиотеки с 19 сapabilities (полномочиями), содержащиеся в этом файле и требующиеся для поддержки работы приложений, написанных с помощью инструментария Qt.
Доп. информация:
Устанавливаемые компоненты:
» Stdcpp (Standard C++ library Common)
» OpenC_SSL (Open C LIBSSL Common)
» PIPS (PIPS Installer)
» Qt (Qt libraries)
» QtWebkit (QtWebkit library)

Совместимость: Symbian 9.4 — S^3

Устанавливать на диск С вашего смартфона в следующем порядке:
1. Qt 4.8.0
2. Qtmobility 1.2.0
3. Qtwebkit 4.8.0

После установки всех QT компонентов необходимо перезагрузить телефон

Читайте также:  Установка заднего стеклоочистителя на матизе

Скачать:
Symbian^3: qt_installer_4.8.zip ( 14,08 МБ )

Nokia_Qt_Installer_v4.7.2_Final___QT_Mobility___QtWebKit.zip ( 40.67 МБ )
qt_installer_v.4.0.7.sis ( 12,24 МБ )
Для Samsung i8910: i8910qtinstaller.sis ( 13.83 МБ )

Так как в дальнейшем много софта будит делаться при помощи QT, тут можно скачать их отдельно для Nokia, Vivaz, Omnia HD I8910.

Скачать:
Релиз от 01.03.2011.
Для Symbian^1: qt_S_1.sis ( 12,54 МБ )

Библиотеки Qt для Nokia, вес архива 10.9 мб

Библиотеки Qt для Vivaz, вес архива 12.3 мб

Библиотеки Qt для Samsungi i8910 13.83 МБ

Сообщение отредактировал Enotche — 05.07.14, 10:38

Добавь в шапку QT для Самсунг i8910.
Модификация — faenil & madhacker

источник

Оглавление

Qt for the Symbian platform has some requirements that are given in more detail in the Qt for the Symbian platform Requirements document.

This document describes how to install and configure Qt for the Symbian platform from scratch. If you are using pre-built binaries, follow the instructions given in the Installing Qt for the Symbian platform from a Binary Package document.

Шаг 1: Настройка среды разработки

Make sure your Symbian development environment is correctly installed and patched as explained in the Qt for the Symbian platform Requirements document.

After you have finished the Symbian development environment setup, it is good to verify that environment is functional for example by compiling one of the pure Symbian examples for both emulator and HW. This can be done from command prompt as follows:

If all steps pass without errors your Symbian development environment is very likely installed correctly.

Шаг 2: Установка Qt

Uncompress the downloaded source package into the directory you want Qt installed, e.g. C:\Qt\4.7.4.

Note: Qt must be installed on the same drive as the Symbian SDK you are using, and the install path must not contain any spaces.

Шаг 3: Установка переменных окружения

Для работы с Qt, вам нужно добавить путь в переменную среды PATH:

Сделайте это добавлением c:\Qt\4.7.4\bin к переменной PATH.

On Windows thePATH can be extended by navigating to «Control Panel->System->Advanced->Environment variables».

In addition, you must configure the environment for use with the Symbian emulator. This is done by locating the Carbide.c++ submenu on the Start menu, and choosing «Configure environment for WINSCW command line».

If you are planning to use abld (the default build system that comes with the S60 SDK) to build Qt, you will also need to set the following environment variable:

This is not necessary for other applications, only when building Qt.

Шаг 4: Настройка Qt

To configure Qt for the Symbian platform, do:

(to build the tools using MinGW, and the libraries using abld)

(to build the tools using MinGW, and the libraries using SBSv2)

SBSv2 (also known as Raptor) is a next-generation Symbian build system. SBSv2 is not officially supported by any of the S60 SDKs currently available from Forum Nokia.

Шаг 5: Сборка Qt

To build Qt for the emulator, type:

To build Qt for the device, type:

Congratulations, Qt is now ready to use.

Шаг 7: Установка библиотек Qt на устройство

To run the demo on a real device, you first have to install the Qt libraries on the device:

The Qt libraries are built with «All -Tcb» capability, so that they can support all types of application. If you don’t have a suitable certificate, it is possible to patch the binaries as follows:

If you have no certificate, build a self signed Qt:

If you have a symbian-signed developer certificate, specify the capabilities you can sign for, for example:

Запуск демонстрационных программ Qt

We’ve included a subset of the Qt demos in this package for you to try out. An excellent starting point is the «fluidlauncher» demo.

Similarly, install fluidlauncher to the device:

This will create a self-signed fluidlauncher.sis and install it to your device.

To run the demos on the emulator simply navigate to the directory of the demo you want to see and run:

For more information about building and running Qt programs on the Symbian platform, see The Symbian platform — Introduction to Qt. Мы надеемся, что вам понравится использование Qt.

Все остальные торговые марки являются собственностью их владельцев. Политика конфиденциальности

Лицензиаты, имеющие действительные коммерческие лицензии Qt, могут использовать этот документ в соответствии с соглашениями коммерческой лицензии Qt, поставляемой с программным обеспечением, либо, альтернативно, в соответствии с условиями, содержащимися в письменном соглашении между вами и Nokia.

Кроме того, этот документ может быть использован в соответствии с условиями GNU Free Documentation License version 1.3, опубликованной фондом Free Software Foundation.

Читайте также:  Установка камер видеонаблюдения витая пара

источник

Оглавление

Qt SDK предоставляет все необходимые инструменты и библиотеки для разработки приложений Qt. Однако, если вы хотите собрать сам Qt под Symbian, то следуйте инструкциям ниже.

Qt for the Symbian platform has some requirements that are given in more detail in the Qt for the Symbian platform Requirements document.

This document describes how to install and configure Qt for the Symbian platform from scratch.

Шаг 1: Настройка среды разработки

Make sure your Symbian development environment is correctly installed and patched as explained in the Qt for the Symbian platform Requirements document.

After you have finished the Symbian development environment setup, it is good to verify that environment is functional for example by compiling one of the pure Symbian examples for both emulator and HW. This can be done from command prompt as follows:

If all steps pass without errors your Symbian development environment is very likely installed correctly.

Шаг 2: Установка Qt

Uncompress the downloaded source package into the directory you want Qt installed, e.g. C:\Qt\4.8.4.

Note: Qt must be installed on the same drive as the Symbian SDK you are using, and the install path must not contain any spaces.

Шаг 3: Установка переменных окружения

Для работы с Qt, вам нужно добавить путь в переменную среды PATH:

Сделайте это добавлением c:\Qt\4.8.4\bin к переменной PATH.

On Windows thePATH can be extended by navigating to «Control Panel->System->Advanced->Environment variables».

In addition, you must configure the environment for use with the Symbian emulator. This is done by locating the Carbide.c++ submenu on the Start menu, and choosing «Configure environment for WINSCW command line».

If you are planning to use abld (the default build system that comes with the S60 SDK) to build Qt, you will also need to set the following environment variable:

This is not necessary for other applications, only when building Qt.

Шаг 4: Настройка Qt

To configure Qt for the Symbian platform, do:

(to build the tools using MinGW, and the libraries using abld)

(to build the tools using MinGW, and the libraries using SBSv2)

Напишите ./configure -help, чтобы получить список всех доступных опций. Страница Опции конфигурации Qt даёт их краткий обзор.

SBSv2 (also known as Raptor) is a next-generation Symbian build system. SBSv2 is not officially supported by any of the S60 SDKs currently available from Forum Nokia.

Шаг 5: Сборка Qt

To build Qt for the emulator, type:

To build Qt for the device, type:

Congratulations, Qt is now ready to use.

Шаг 7: Установка библиотек Qt на устройство

To run a Qt application on a device, it must have Qt libraries installed.

Symbian devices have a pre-installed Qt as follows:

  • Symbian Anna devices have the pre-installed Qt, Qt Mobility, and Qt Webkit.
  • Symbian Belle and later devices have the pre-installed Qt on the device firmware.

Nokia Smart Installer for Symbian deploys the required Qt libraries to supported S60 and Symbian devices if the libraries are not pre-installed.

Nokia Developer site’s Device specifications provide information on which devices have a pre-installed Qt and the used Qt version.

To create your own Qt installation package, do as follows:

The Qt libraries are built with «All -Tcb» capability, so they can support all types of applications. If you don’t have a suitable certificate, you can patch the binaries in either of the following ways:

  • If you have no certificate, build a self-signed Qt:
  • If you have a symbian-signed developer certificate, specify the capabilities you can sign for, for example:

Запуск демонстрационных программ Qt

We’ve included a subset of the Qt demos in this package for you to try out. An excellent starting point is the «fluidlauncher» demo.

Similarly, install fluidlauncher to the device:

This will create a self-signed fluidlauncher.sis and install it to your device.

To run the demos on the emulator simply navigate to the directory of the demo you want to see and run:

For more information about building and running Qt programs on the Symbian platform, see The Symbian platform — Introduction to Qt. Мы надеемся, что вам понравится использование Qt.

Представленная здесь документация лицензирована в соответствии с условиями GNU Free Documentation License version 1.3, опубликованной Фондом свободного программного обеспечения (Free Software Foundation).

Исходная версия документации доступна на www.qt-project.org.

Digia, Qt и их соответствующие логотипы являются торговыми марками компании Digia Plc в Финляндии и/или других странах по всему миру. Все остальные торговые марки являются собственностью их владельцев. Политика конфиденциальности

Читайте также:  Установка пвх перегородок с дверями

источник

Qt Documentation

Contents

Qt provides all the necessary tools and libraries for developing Qt applications. However, if you want to build Qt for Symbian, follow the instructions below.

Qt for the Symbian platform has some requirements that are given in more detail in the Qt for the Symbian platform Requirements document.

This document describes how to install and configure Qt for the Symbian platform from scratch.

Step 1: Set Up the Development Environment

Make sure your Symbian development environment is correctly installed and patched as explained in the Qt for the Symbian platform Requirements document.

After you have finished the Symbian development environment setup, it is good to verify that environment is functional for example by compiling one of the pure Symbian examples for both emulator and HW. This can be done from command prompt as follows:

If all steps pass without errors your Symbian development environment is very likely installed correctly.

Step 2: Install Qt

Uncompress the downloaded source package into the directory you want Qt installed, e.g. C:\Qt\%VERSION% .

Note: Qt must be installed on the same drive as the Symbian SDK you are using, and the install path must not contain any spaces.

Step 3: Set the Environment variables

In order to build and use Qt, the PATH environment variable needs to be extended:

This is done by adding c:\Qt\%VERSION%\bin to the PATH variable.

On Windows the PATH can be extended by navigating to «Control Panel->System->Advanced->Environment variables».

In addition, you must configure the environment for use with the Symbian emulator. This is done by locating the Carbide.c++ submenu on the Start menu, and choosing «Configure environment for WINSCW command line».

If you are planning to use abld (the default build system that comes with the S60 SDK) to build Qt, you will also need to set the following environment variable:

This is not necessary for other applications, only when building Qt.

Step 4: Configure Qt

To configure Qt for the Symbian platform, do:

(to build the tools using MinGW, and the libraries using abld)

(to build the tools using MinGW, and the libraries using SBSv2)

Type ./configure -help to get a list of all available options. The Configuration Options for Qt page gives a brief overview of these.

SBSv2 is a next-generation Symbian build system. SBSv2 is not officially supported by any of the S60 SDKs currently available from Forum Nokia.

Step 5: Build Qt

To build Qt for the emulator, type:

To build Qt for the device, type:

Congratulations, Qt is now ready to use.

Step 7: Installing Qt Libraries on the Device

To run a Qt application on a device, it must have Qt libraries installed.

Symbian devices have a pre-installed Qt as follows:

  • Symbian Anna devices have the pre-installed Qt, Qt Mobility, and Qt Webkit.
  • Symbian Belle and later devices have the pre-installed Qt on the device firmware.

Nokia Smart Installer for Symbian deploys the required Qt libraries to supported S60 and Symbian devices if the libraries are not pre-installed. To create your own Qt installation package, do as follows:

The Qt libraries are built with «All -Tcb» capability, so they can support all types of applications. If you don’t have a suitable certificate, you can patch the binaries in either of the following ways:

    If you have no certificate, build a self-signed Qt:

Running Qt demos

We’ve included a subset of the Qt demos in this package for you to try out. An excellent starting point is the «fluidlauncher» demo.

Similarly, install fluidlauncher to the device:

This will create a self-signed fluidlauncher.sis and install it to your device.

To run the demos on the emulator simply navigate to the directory of the demo you want to see and run:

For more information about building and running Qt programs on the Symbian platform, see The Symbian platform — Introduction to Qt. We hope you will enjoy using Qt.

В© 2016 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.

источник

Добавить комментарий

Adblock
detector