11 g Release 2 (11.2) for Oracle Solaris on x86-64 (64-Bit)
This gu >g Release 2 (11.2) on Oracle Solaris on x86-64 (64-Bit) systems. It includes information about the following topics:
1 Reviewing Information About This Guide
This guide describes how to install Oracle Database by using the default installation options.
Tasks Described in This Guide
The procedures in this guide describe how to:
Configure your system to support Oracle Database
Install Oracle Database on a local file system by using the Typical Installation option
Configure a general-purpose Oracle Database installation that uses the local file system for database file storage
Results of a Successful Installation
After you successfully install Oracle Database:
The database that you created and the default Oracle Net listener process run on the system.
Oracle Enterprise Manager Database Control run and can be accessed by using a web browser.
Tasks Not Described in This Guide
This gu >not describe how to complete the following tasks:
Using the Advanced Installation option to install the software
Installing the software on a system that has an existing Oracle software installation
Installing Oracle Clusterware and Oracle Real Application Clusters (Oracle RAC) on a cluster
Enabling Enterprise Manager e-mail notifications or automated backups
Enabling core file creation
Verifying UDP and TCP kernel parameters
Using alternative storage options such as Automatic Storage Management
Installing and configuring Oracle Grid Infrastructure
Where to Get Additional Installation Information
For more information about installing Oracle Database, including information about the tasks not described in this guide, refer to one of the following guides:
To install the software on a single system, refer to Oracle Database Installation Guide for Oracle Solaris .
To perform an Oracle Real Application Clusters installation, refer to Oracle Grid Infrastructure Installation Guide for Oracle Solaris and Oracle Real Application Clusters Installation Guide for Linux and UNIX . These guides describe how to install Oracle Clusterware and Oracle Real Application Clusters. Oracle clusterware is a prerequisite for Oracle Real Application Clusters installations.
2 Logging In to the System as root
Before you install Oracle Database, you must complete several tasks as the root user. To log in as the root user, complete one of the following procedures:
You must install the software from an X Window System workstation, an X terminal, or a PC or other system with X server software installed.
If you are installing the software from an X Window System workstation or X terminal, then perform the following:
Start a local terminal session, for example, an X terminal ( xterm ).
If you are not installing the software on the local system, then enter the following command to enable the remote host to display X applications on the local X server:
If you are not installing the software on the local system, then use the ssh , rlogin , or telnet command to connect to the system where you want to install the software:
If you are not logged in as the root user, then enter the following command to switch user to root :
If you are installing the software from a PC or other system with X server software installed, then:
If necessary, refer to your X server documentation for more information about completing this procedure. Depending on the X server software that you are using, you may have to complete the tasks in a different order.
Start the X server software.
Configure the security settings of the X server software to permit remote hosts to display X applications on the local system.
Connect to the remote system where you want to install the software, and start a terminal session on that system, for example, an X terminal ( xterm ).
If you are not logged in as the root user on the remote system, then enter the following command to switch user to root :
3 Checking the Hardware Requirements
The system must meet the following minimum hardware requirements:
3.1 Memory Requirements
The following are the memory requirements for installing Oracle Database 11 g Release 2 (11.2):
Recommended : 2 GB of RAM or more
To determine the physical RAM size, enter the following command:
If the size of the physical RAM is less than the required size, then you must install more memory before continuing.
The following table describes the relationship between installed RAM and the configured swap space recommendation:
On Oracle Solaris, if you use non-swappable memory, like ISM, then you should deduct the memory allocated to this space from the available RAM before calculating swap space.
If you plan to install Oracle Database on systems using DISM, then available swap space must be at least equal to the sum of the SGA sizes of all instances running on the servers.
|Available RAM||Swap Space Required|
|Between 1 GB and 2 GB||1.5 times the size of the RAM|
|Between 2 GB and 16 GB||Equal to the size of the RAM|
|More than 16 GB||16 GB|
To determine the size of the configured swap space, enter the following command:
The output of this command shows the total/available swap blocks, where each block equals 512 bytes and not 1 KB.
If necessary, refer to the operating system documentation for information about how to configure additional swap space.
To determine the available RAM and swap space, enter the following command:
where, n is the number of seconds to delay for the next iterations and i is the number of iterations you want to test.
Oracle recommends that you take multiple values for the available RAM and swap space before finalizing a value. This is because the available RAM and swap space keep changing depending on the user interactions with the computer.
Contact your operating system vendor for swap space allocation guidance for your server. The vendor guidelines supersede the swap space requirements listed in this guide.
3.2 System Architecture
To determine whether the system architecture can run the software, enter the following command:
This command displays the processor type. Verify that the processor architecture matches the Oracle software release to install. If you do not see the expected output, then you cannot install the software on this system.
3.3 Disk Space Requirements
The following are the disk space requirements for installing Oracle Database 11 g Release 2 (11.2):
At least 1 GB of space in the /tmp directory
To determine the amount of disk space available in the /tmp directory, enter the following command:
This command displays disk space in 1 kilobyte blocks. On most systems, you can use the df command with the -h flag ( df -h ) to display output in «human-readable» format
If there is less than 1 GB of free space in the /tmp directory, then complete one of the following steps:
Delete unnecessary files from the /tmp directory to meet the disk space requirement.
Set the TMP and TMPDIR environment variables when setting the oracle user’s environment.
«Configuring the oracle User’s Environment» for more information on setting TMP and TMPDIR
Extend the file system that contains the /tmp directory. If necessary, contact the system administrator for information about extending file systems.
To determine the amount of free disk space on the system, enter the following command:
The following table shows the approximate disk space requirements for software files for each installation type:
Additional disk space, either on a file system or on an Automatic Storage Management disk group is required for the fast recovery area if you choose to configure automated backups.
4 Checking the Software Requirements
Depending on the products that you intend to install, verify that the following software are installed on the system.
Oracle Universal Installer performs checks on the system to verify that it meets the listed requirements. To ensure that these checks pass, verify the requirements before you start Oracle Universal Installer.
4.1 Operating System Requirements
The following are the operating system requirements for Oracle Database 11 g Release 2 (11.2):
Oracle Solaris 10 U6 (5.10-2008.10)
Starting with Oracle Database 11 g Release 2 (22.214.171.124), Oracle Database is also supported on the following operating system version (or later):
Oracle Solaris 11 11/11 X86
No special kernel parameters or patches are required at the time of this release for Oracle Solaris 11.
To determine the distribution and version of Oracle Solaris installed, enter the following command:
In this example, the version shown is Oracle Solaris 10 (5.10). If necessary, refer to your operating system documentation for information about upgrading the operating system.
To determine the update level of Oracle Solaris installed, enter the following command:
4.2 Package Requirements
The following packages (or later versions) are required for Oracle Database 11g Release 2 (11.2) on Oracle Solaris 10:
The following packages (or later versions) are required for installing Oracle Database Client 11 g Release 2 (11.2) on Oracle Solaris 11:
You may also require additional font packages for Java, depending on your locale. Refer to the following website for more information:
To determine whether the required packages are installed, enter commands similar to the following:
If a package is not installed, then install it. Refer to your operating system or software documentation for information about installing packages.
4.3 Compiler Requirements
Oracle Solaris Studio 12 (C and C++ 5.9) is supported with Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, and Oracle XML Developer’s Kit (XDK) for Oracle Database 11g Release 2.
4.4 Additional Software Requirements
Depending on the components you want to use, you must ensure that the following software are installed:
4.4.1 Oracle Messaging Gateway
Oracle Messaging Gateway supports the integration of Oracle Streams Advanced Queuing (AQ) with the following software:
IBM MQ Series V6.0, client and server
If you require a CSD for WebSphere MQ, then refer to the following website for download and installation information:
4.4.2 Oracle JDBC/OCI Drivers
Use JDK 6 (Java SE Development Kit 126.96.36.199 ) or JDK 5 ( 188.8.131.52 ) with the JNDI extension with the Oracle Java Database Connectivity and Oracle Call Interface drivers. However, these are not mandatory for the database installation. Please note that IBM JDK 1.5 is installed with this release.
JDK 6 is the minimum level of JDK supported on Oracle Solaris 11.
4.4.3 Programming Languages
The following products are certified for use with:
Micro Focus Server Express 5.1
Oracle Solaris Studio 12 Fortran F 95
4.4.4 Browser Requirements
Oracle Enterprise Manager Database Control supports the following browsers:
Microsoft Internet Explorer 10.0 (supports Oracle Enterprise Manager Database Control 184.108.40.206 and higher)
Microsoft Internet Explorer 9.0
Microsoft Internet Explorer 8.0
Microsoft Internet Explorer 7.0 SP1
Microsoft Internet Explorer 6.0 SP2
Firefox 21.0 (supports Oracle Enterprise Manager Database Control 220.127.116.11)
Firefox 17.0.6 ESR (supports Oracle Enterprise Manager Database Control 18.104.22.168)
Google Chrome 27.0 (supports Oracle Enterprise Manager Database Control 22.214.171.124)
4.5 Patch Requirements
The following or later patches are required for Oracle Database 11g Release 2 (11.2) for Oracle Solaris 10:
4.5.1 Operating system-specific patches
120754-06: SunOS 5.10_x86 libmtsk
119961-05: SunOS 5.10_x86: Assembler
119964-14: SunOS 5.10_x86 Shared library patch for C++_x86
To determine whether an operating system patch is installed, enter a command similar to the following:
For example, to determine if any version of the 119963 patch is installed, use the following command:
If an operating system patch is not installed, then download it from the My Oracle Support website and install it:
5 Creating Required Operating System Groups and User
The following local operating system groups and users are required if you are installing Oracle Database:
The Oracle Inventory group (typically, oinstall )
The OSDBA group (typically, dba )
The Oracle software owner (typically, oracle )
The OSOPER group (Optional. Typically, oper )
To determine whether these groups and users exist, and if necessary, to create them, follow these steps:
To determine whether the oinstall group exists, enter the following command:
If the output of this command shows the oinstall group name, then the group exists.
If the oraInst.loc file exists, then the output from this command is similar to the following:
The inst_group parameter shows the name of the Oracle Inventory group, oinstall .
To determine whether the dba group exists, enter the following command:
If the output from this commands shows the dba group name, then the group exists.
If necessary, enter the following commands to create the oinstall and dba groups:
To determine whether the oracle user exists and belongs to the correct groups, enter the following command:
If the oracle user exists, this command displays information about the groups to which the user belongs. The output should be similar to the following, indicating that oinstall is the primary group and dba is a secondary group:
If necessary, complete one of the following actions:
If the oracle user exists, but its primary group is not oinstall or it is not a member of the dba group, then enter the following command:
If the oracle user does not exist, enter the following command to create it:
This command creates the oracle user and specifies oinstall as the primary group and dba as the secondary group.
Enter the following command to set the password of the oracle user:
6 Configuring Kernel Parameters on Oracle Solaris 10
On Oracle Solaris 10, verify that the kernel parameters shown in the following table are set to values greater than or equal to the minimum value shown.
The kernel parameter values shown in this section are minimum values only. For production database systems, Oracle recommends that you tune these values to optimize the performance of the system. Refer to your operating system documentation for more information about tuning kernel parameters.
On Oracle Solaris 10, you are not required to make changes to the /etc/system file to implement the System V IPC. Oracle Solaris 10 uses the resource control facility for its implementation. For further information, contact your vendor.
|Resource Control||Recommended Value|
project.max-shm-memory resource control = the cumulative sum of all shared memory allocated on each Oracle database instance started under the corresponding project.
The project.max-shm-memory resource control value assumes that no other application is using the shared memory segment from this project other than the Oracle instances. If applications, other than the Oracle instances are using the shared memory segment, then you must add that shared memory usage to the project.max-shm-memory resource control value.
Ensure that memory_target (or max_sga_size ) does not exceed process.max-address-space and project.max-shm-memory . For more information, see My Oracle Support Note 1370537.1 at:
Use the following procedure to view the current value specified for resource controls, and to change them if necessary:
To display the current values of the resource control, enter the following commands:
If you must change any of the current values, then:
To modify the value of max-shm-memory to 6 GB:
To modify the value of max-sem-ids to 256:
When you use the prctl command (Resource Control) to change system parameters, you do not have to restart the system for these parameter changes to take effect. However, the changed parameters do not persist after a system restart.
Use the following procedure to modify the resource control project settings, so that they persist after a system restart:
By default, Oracle instances are run as the oracle user of the dba group. A project with the name group.dba is created to serve as the default project for the oracle user. Run the command id to verify the default project for the oracle user:
To set the maximum shared memory size to 2 GB, run the projmod command:
Alternatively, add the resource control value project.max-shm-memory=(privileged,2147483648,deny) to the last field of the project entries for the Oracle project.
After these steps are complete, check the values for the /etc/project file using the following command:
The output should be similar to the following:
To verify that the resource control is active, check process ownership, and run the commands id and prctl , as in the following example:
The value for the maximum shared memory depends on the SGA requirements and should be set to a value greater than the SGA size.
For additional information, refer to the Oracle Solaris Tunable Parameters Reference Manual.
7 Configuring Shell Limits
Oracle recommends that you set shell limits and system configuration parameters as described in this section.
The shell limit values in this section are recommended values only. For production database systems, Oracle recommends that you tune these values to optimize the performance of the system. Refer to your operating system documentation for more information about configuring shell limits.
The ulimit settings determine process memory related resource limits. Verify that the shell limits displayed in the following table are set to the values shown:
|Shell Limit||Description||Soft Limit (KB)||Hard Limit (KB)|
|STACK||Size of the stack segment of the process||at most 10240||at most 32768|
|NOFILES||Open file descriptors||at least 1024||at least 65536|
|MAXUPRC or MAXPROC||Maximum user processes||at least 2047||at least 16384|
To display the current value specified for these shell limits enter the following commands:
8 Creating Required Directories
Create directories with names similar to the following, and specify the correct owner, group, and permissions for them:
The Oracle base directory
An optional Oracle data file directory
Before you create an Oracle base directory, you must identify an appropriate file system with sufficient free disk space.
If you do not want to create a separate Oracle data file directory, you can install the data files in a subdirectory of the Oracle base directory. However, this is not recommended for production databases.
To determine where to create these directories:
Enter the following command to display information about all mounted file systems:
This command displays information about all the file systems mounted on the system, including:
The total amount, used amount, and available amount of disk space, in kilobytes
The mount point directory for that file system
From the display, identify either one or two file systems that meet the disk space requirements mentioned earlier in this section.
Note the name of the mount point directory for each file system that you identified.
In the following examples, /u01 is the mount point directory used for the software, and /u02 is the mount point directory used for the Oracle data file directory. You must specify the appropriate mount point directories for the file systems on your system.
To create the required directories and specify the correct owner, group, and permissions for them:
In the following procedure, replace /u01 and /u02 with the appropriate mount point directories that you identified in Step 3 previously.
Enter the following command to create subdirectories in the mount point directory that you identified for the Oracle base directory:
If you intend to use a second file system for the Oracle Database files, then create an oradata subdirectory in the mount point directory that you >/u02 in the examples):
Change the owner and group of the directories that you created to the oracle user and the oinstall group:
Change the permissions on the directories that you created to 775:
9 Configuring the oracle User’s Environment
You run Oracle Universal Installer from the oracle account. However, before you start Oracle Universal Installer, you must configure the environment of the oracle user. To configure the environment, you must:
Set the default file mode creation mask ( umask ) to 022 in the shell startup file.
Set the DISPLAY environment variable.
To set the oracle user’s environment:
Start a new terminal session, for example, an X terminal ( xterm ).
Enter the following command to ensure that X Window applications can display on this system:
If you are not logged in to the system where you want to install the software, then log in to that system as the oracle user.
If you are not logged in as the oracle user, then switch user to oracle :
To determine the default shell for the oracle user, enter the following command:
To run the shell startup script, enter one of the following commands:
If you are not installing the software on the local computer, then run the following command on the remote system to set the DISPLAY variable:
Bourne, Bash or Korn shell:
In this example, local_host is the host name or IP address of the local computer to use to display Oracle Universal Installer.
Run the following command on the remote system to check if the shell and the DISPLAY environmental variable are set correctly:
Now to enable X applications, run the following commands on the local computer:
To verify that X applications display is set properly, run a X11 based program that comes with the operating system such as xclock :
In this example, you can find xclock at /usr/X11R6/bin/xclocks . If the DISPLAY variable is set properly, then you can see xclock on your computer screen.
PC-X Server or operating system vendor documents for further assistance
If you determined that the /tmp directory has less than 1 GB of free disk space, then >TMP and TMPDIR environment variables to specify a temporary directory on this file system:
To determine the free disk space on each mounted file system use the following command:
If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:
Enter commands similar to the following to set the TMP and TMPDIR environment variables:
Bourne, Bash, or Korn shell:
Enter commands similar to the following to set the ORACLE_BASE and ORACLE_SID environment variables:
Bourne, Bash, or Korn shell:
In this example, /u01/app/oracle is the Oracle base directory that you created or >sales is the database name (typically no more than five characters).
Enter the following commands to ensure that the ORACLE_HOME and TNS_ADMIN environment variables are not set:
Bourne, Bash, or Korn shell:
If the ORACLE_HOME environment variable is set, then Oracle Universal Installer uses the value that it specifies as the default path for the Oracle home directory. However, if you set the ORACLE_BASE environment variable, then Oracle recommends that you unset the ORACLE_HOME environment variable and choose the default path suggested by Oracle Universal Installer.
10 Mounting the Product Disc
On most Oracle Solaris systems, the product disc mounts automatically when you insert it into the drive. If the disc does not mount automatically, then follow these steps to mount it:
If necessary, enter a command similar to the following to eject the currently mounted disc, then remove it from the drive:
Insert the disc into the disc drive.
To verify that the disc mounted automatically, enter a command similar to the following:
If this command fails to display the contents of the disc, then enter a command similar to the following:
In this example, /dvd is the disc mount point directory and /dev/dsk/cxtydzs2 is the device name for the disc device, for example /dev/dsk/c0t2d0s2 .
If Oracle Universal Installer displays the Disk Location dialog box, then enter the disc mount point directory path. For example:
Disc mounted automatically:
11 Installing Oracle Database
After configuring the oracle user’s environment, start Oracle Universal Installer and install Oracle Database as follows:
To start Oracle Universal Installer, enter the following command:
If Oracle Universal Installer does not start, then refer to Oracle Database Installation Guide for Oracle Solaris for information about how to troubleshoot X Window display problems.
The following table describes the recommended action for each Oracle Universal Installer screen. Use the following guidelines to complete the installation:
If you need more assistance, or to choose an option that is not a default, click Help for additional information.
If you encounter errors while installing or linking the software, then refer to Oracle Database Installation Guide for Oracle Solaris for information about troubleshooting.
If you have completed the tasks listed previously, then you can complete the installation by choosing the default values on most screens.
|Configure Security Updates||Enter your e-mail address, preferably your My Oracle Support e-mail address or user name in the Email field.|
You can select the I wish to receive security updates via My Oracle Support check box to receive security updates.
Enter your My Oracle Support password in the My Oracle Support Password field.
Use My Oracle Support credentials for download: Select this option to download and apply the latest software updates.
Click Proxy Settings to configure a proxy for Oracle Universal Installer to use to connect to the Internet. Prov >g Release 2 (126.96.36.199), you can enter the Proxy Realm information if required. The proxy realm information is case-sensitive.
Click Test Connection to ensure that your proxy settings are correctly entered, and the installer can download the updates.
Use pre-downloaded software updates: Select this option to apply previously downloaded software updates.
Skip Software Updates: Select this option if you do not want to apply any updates.
If you selected Use My Oracle Support credentials for download in the previous screen, select Download and apply all updates , and then click Next .
If you selected Use pre-downloaded software updates in the previous screen, select Apply all updates , and then click Next .
Create and configure a database
Install database software only
Upgrade an existing database
Desktop Class: Choose this option if you are installing on a laptop or desktop class system.
Server Class: Choose this option if you are installing on a server class system, such as what you would use when deploying Oracle in a production data center.
Single instance database installation: This option installs the database and the listener.
Real Application Clusters database installation: This option installs Oracle Real Application Clusters.
Oracle RAC One Node database installation: This option installs the Oracle RAC One Node database.
Note: Oracle RAC One Node is supported only with Oracle Clusterware.
Typical Install: This installation method is selected by default. It lets you quickly install Oracle Database using minimal input.
Advanced Install: This installation method enables to perform more complex installations.
Oracle base: The Oracle base path appears by default. You can change the path based on your requirement.
Software location: In the Software Location section, accept the default value or enter the Oracle home directory path in which you want to install Oracle components. The directory path should not contain spaces.
Storage Type: Select File System , or Oracle Automatic Storage Management as the database storage option.
Database file location: If you select File System as your storage type, then click Browse and specify a database file location.
ASMSNMP Password: If you select Oracle Automatic Storage Management as your Storage Type, then specify the password for the ASMSNMP user.
Database edition: Select the database edition to install.
OSDBA Group: The OSDBA group is selected by default. You can also select the OSDBA group from the list.
Global database name: Specify the Global Database Name using the following syntax:
For example, sales.us.example.com
Administrative password: Enter the password for the privileged database account.
Confirm Password: Reenter, and confirm the password for the privileged database account.
Specify the full path of the Oracle Inventory directory. Ensure that the operating system group selected is oinstall . Click Next to continue.
Oracle Universal Installer checks the system to verify that it is configured correctly to run Oracle software. If you have completed all the preinstallation steps in this guide, all the checks should pass.
If a check fails, then review the cause of the failure listed for that check on the screen. If possible, rectify the problem and rerun the check. Alternatively, if you are satisfied that your system meets the requirements, then you can select the check box for the failed check to manually verify the requirement.
Note : Oracle recommends that you use caution in checking the Ignore All option. If you check this option, then Oracle Universal Installer may not confirm that your system can install Oracle Database successfully.
Note: Starting with Oracle Database 11 g Release 2 (11.2), you can save all the installation steps into a response file by clicking Save Response File. Later, this file can be used for a silent installation.
This screen then displays the status information for the configuration assistants that configure the software and create a database.
Finally, a message is displayed at the end of Database Configuration Assistant process, and click OK .
Execute the root.sh script as the root user to complete the installation and click OK .
12 Installing Oracle Database Examples
If you plan to use the following products or features, then download and install the products from the Oracle Database Examples media:
Oracle JDBC Development Drivers
Various Oracle product demonstrations
For information about installing software and various Oracle product demonstrations from the Oracle Database Examples media, refer to Oracle Database Examples Installation Guide .
13 What to Do Next?
To become familiar with this release of Oracle Database, it is recommended that you complete the following tasks:
Log in to Oracle Enterprise Manager Database Control using a web browser.
Oracle Enterprise Manager Database Control is a web-based application that you can use to manage a single Oracle Database installation. The default URL for Database Control is similar to the following:
To log in, use the user name SYS and connect as SYSDBA. Use the password that you specified for this user during the Oracle Database 10 g installation.
Refer to Oracle Database Installation Guide for Oracle Solaris for information about required and optional postinstallation tasks, depending on the products to use.
Refer to Oracle Database Installation Guide for Oracle Solaris for information about how to use Database Control to learn about the configuration of your installed database.
To learn more about using Oracle Enterprise Manager Database Control to administer a database, refer to Oracle Database 2 Day DBA .
The Oracle Database 2 Day DBA is designed for new Oracle DBAs and describes how to use Database Control to manage all aspects of an Oracle Database installation. It also provides information about how to enable e-mail notifications and automated backups, which you might not have configured during the installation.
14 Additional Information
This section contains information about the following:
You are welcome to install and evaluate the products included in this media pack for 30 days under the terms of the Trial License Agreement. However, you must purchase a program license if you want to continue using any product after the 30 day evaluation period. See the following section for information about purchasing program licenses.
Purchasing Licenses and Version Updates
You can purchase program licenses and updated versions of Oracle products from the Oracle Store website:
Contacting Oracle Support Services
If you have purchased Oracle Product Support, you can call Oracle Support Services for assistance 24 hours a day, seven days a week. For information about purchasing Oracle Product Support or contacting Oracle Support Services, go to the Oracle Support Services website:
Locating Product Documentation
Product documentation includes information about configuring, using, or administering Oracle products on any platform. The product documentation for Oracle Database 11 g products is available in both HTML and PDF formats in the following locations:
On the Oracle Database Documentation Library media:
Use a web browser to view or open the index.htm file in the top-level directory on the media.
From the Oracle Technology Network (OTN) website:
To view PDF documents, download the free Adobe Acrobat Reader from the Adobe website, if necessary:
15 Documentation Accessibility
For information about Oracle’s commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc& >.
Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc& > or visit http://www.oracle.com/pls/topic/lookup?ctx=acc& > if you are hearing impaired.
Oracle Database Quick Installation Gu >g Release 2 (11.2) for Oracle Solaris on x86-64 (64-Bit)
Copyright © 2014, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:
U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are «commercial computer software» pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.
This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.